Xerox 490 ST, 480 ST manual Xerox Document Centre System Administration Guide

g)Insert CentreWare Networks Services CD-ROM and click Have Disk.

h)Click the Browse button and select the directory containing the Windows NT drivers. Details for this are contained in the document entitled Network Services Guide. Select the PRINTER.INF file then click Open.

i)The Wizard will return you to the previous dialog. Verify the path and file name are correct and click OK.

j)At the next dialog, enter a name for the printer and select whether you want that printer to be the default then click Next>.

k)If the printer will not be shared, click Next>. To share the printer, check the share checkbox, enter a Share Name, then click Next>.

l)At the next dialog it is recommended that you print a test page. Click Finish.

m)Wait for the Test Print to print. A new dialog will ask for confirmation of the test print; if the page printed, click Yes. If it did not print, run the Printing Troubleshooter in NT.

3.Send a test job to the printer.

a)Check your test job for quality and use the problem solving section of the Document Centre Reference Guide for resolving print defects.

b)If your print job does not print, refer to the Troubleshooting section in this document to correct the problem.

Page 11 - 4 Xerox Document Centre System Administration Guide