Xerox 480 ST, 490 ST manual Mount the CentreWare Network Services CD-ROM

Go to a workstation and...

NOTE	This procedure assumes that any TCP/IP components necessary for
	network installation have already been assigned to the Document
	Centre. If these components have not been configured, please refer
	to the appropriate information contained within the section entitled
	Dynamic/Static IP Addresses & WINS before continuing further.
	1.	Mount the CentreWare Network Services CD-ROM .
		Solaris/SunOS, HP-UX, and AIX users can load the
		CentreWare Print DCPR Tool. Details are contained in the
		document entitled CentreWare Network Services Guide.
	2.	Add the printers host name, TCP/IP address, hardware
		address to your /etc/hosts file or NIS database depending on
		your UNIX version.
	3.	Create a queue using the CentreWare tool OR by using the
		native tools available in your operating system version.
	4.	Create a print job and send it to the printer.
	5.	Check your test job for quality and use the Problem Solving
		section of the Document Centre Reference Guide for
		resolving print defects.
	6.	If your print job does not print, refer to the Troubleshooting
		section in this document entitled TCP/IP Troubleshooting
		to correct the problem.
	7.	Repeat this Go to a workstation and... procedure at each
		workstation that will print to this printer.

7. UNIX Networks

Xerox Document Centre System Administration Guide Page 7 - 3