Xerox 490 ST, 480 ST manual Go to the Document Centre

Go to the Document Centre and...

1.Connect your Document Centre to the network with the appropriate cabling.

2.Enter the Tools Menu.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enable the Network Protocol.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the NetWare button.

d)Wait for the screen to refresh and press the Protocol and Media button.

e)Press the Enable button. If Physical Media buttons appear, select either Ethernet or Token Ring. Press Save.

4.Set the Frame Type.

a)Press the Frame Type button.

b)Select the frame type desired then press Save to retain your changes and exit to the NetWare Options screen.

5.Exit the Tools Menu.

a)Press the Exit Tools button. The printer will store the settings you have made.

Page 4 - 2 Xerox Document Centre System Administration Guide