Xerox 490 ST, 480 ST manual Go to a workstation

Go to a workstation and...

1.Use the CentreWare Print and FAX Drivers CD-ROM to install print drivers on a Windows-based workstation. Details for this are found in the document supplied with your printer entitled Network Services Guide.

2.Connect the print driver you loaded above to the queue you created on the NetWare server.

3.Open an application and print a test job.

4.Check your test job for quality and use the problem solving section of the Document Centre Reference Guide for resolving print defects.

5.If your test job does not print, refer to the troubleshooting section in this document to correct the problem.

6.Repeat this Go to a workstation and... procedure at each workstation that will print to this printer.

Page 4 - 4 Xerox Document Centre System Administration Guide