Xerox 480 ST, 490 ST manual Go to the Document Center

Go to the Document Center and...

1.Connect your Document Centre to the network with the appro- priate cabling.

2.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enter the Network Setup menus.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the TCP/IP Options button.

22. Port 9100 Printing

Xerox Document Centre System Administration Guide Page 22 - 3