Xerox 480 ST, 490 ST manual Macintosh Networks AppleTalk, Before you start

14. Macintosh Networks (AppleTalk)

Before you start

To enable 100BaseT or a Token Ring interface, refer to Chapter 2

How to Connect to Ethernet or Token Ring Networks to

configure the Speed and Source Routing settings for your environment.

This procedure assumes you have Macintosh computers equipped with an Ethernet card or Token Ring card that is connected to the network and you are currently printing using the AppleTalk protocol.

As part of the procedure in this section you will need to know the following information, the AppleTalk Name you wish to assign to your printer, and the AppleTalk Zone (if used) in which your printer will reside.

Macintosh Networks	(AppleTalk)
14.

Xerox Document Centre System Administration Guide Page 14 - 1