Xerox 480 ST, 490 ST manual Table of Contents

Table of Contents

1. Introduction
How to Use this Document	1-2
Document Centre Options	1-3
Conventions used in this document	1-4
Other Sources of Information	1-5
ST Model Features	1-7
2. How to Connect to Ethernet or Token Ring Networks
Before You Connect to a 100BaseT Ethernet Network	2-1
How to set the Ethernet Speed	2-2
Before You Connect to a Token Ring Network	2-3
How to set the Ring Speed and Source Routing	2-4
How to set the Hardware (MAC) Address	2-5
3. Dynamic/Static IP Addresses and WINS
Before you start	3-1
Dynamic Addressing (DHCP, BOOTP, or RARP)	3-2
Static Addressing	3-6
Windows Internet Name Service (WINS) Installation	3-10
Where to go from here	3-13
4. CentreWare Device Admin Wizard
Before you start	4-1
Go to the Document Centre and	4-2
Go to the workstation and	4-3
Go to the Document Centre and	4-3
Go to a workstation and	4-4
5. Novell NetWare 4.X and 5.X (NDS) Networks
Before You Start	5-1
Go to the Document Centre and	5-2
Go to a workstation and	5-5
6. Novell NetWare 3.1x or 4.x/5.x in Bindery Mode
Before you start	6-1
Go to the Document Centre and	6-2
Go to a workstation and	6-6
7. UNIX Networks
Before You Start	7-1
If you have not already assigned TCP/IP information	7-2