Xerox 490 ST, 480 ST manual Mail Authentication, Select Exit Tools

E-mail Authentication

For login in authentication you must enable it at the Document Centre 490/480/470/460 ST Control Panel. Complete the following steps:

1.Enter the Tools pathwa. y

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

2.Set up Authentication:

a)Select More. (up to 2 times).

b)Select Service Access Control.

c)Select Network Authenticated Access.

d)Select Guest Access and Guest Passcode.

e)Select Next.

f)Select Save.

g)Select Exit Tools.

3.Print a Configuration Sheet and verify the settings against the information that was entered.

Page 21 - 16 Xerox Document Centre System Administration Guide