Xerox 490 ST, 480 ST manual Select Cancel

3.Enable Banyan VINES printing.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

c)Press the Banyan VINES button.

d)Press the Protocol button.

e)Press the Enable button to start the Banyan Vines protocol and press Save.

4.Configure User Name settings and Password.

a)At the next screen, press the Settings button.

b)At the next screen, press the User Name/PC Print Destination button, enter the desired text for this item using the touch panel keys, then press Save.

c)Press the User Password button. Enter the desired text for this item using the touch panel keys, then press Save.

d)Press the Print Service Name button. Enter the desired text for this item using the touch panel keys. When finished press the Save button twice to record the changes.

5.Exit the Tools Menu.

a)Press the Exit Tools button. The printer will store the settings you have made.

6.Print a Configuration Report page from your printer to use in the remainder of the installation.

a)Repeat Steps 2a and 2c.

b)Select System Setting.

c)Select Configuration Report.

d)Select Print Configuration Report Now.

e)Select Cancel.

Page 15 - 2 Xerox Document Centre System Administration Guide