Xerox 480 ST, 490 ST manual Macintosh Networks AppleTalk

4.Assign a Name and Zone to your printer.

a)You will be returned to the previous screen. Press the AppleTalk Settings button.

b)At the next screen, press the Printer Name button, enter the name you want for the printer (this is the name that will appear in the Chooser on your workstations) using the touch panel keys.

c)Press the Zone Name button, enter the desired text for this item using the touch panel keys (the printer default is * which means the printer will appear in ALL zones). When finished press the Save button twice to record the changes.

5.Exit the Tools Menu.

a)Press the Exit Tools button. The printer will store the settings you have made.

6.Print a Configuration Report page from your printer to use in the remainder of the installation.

a)Repeat Steps 2a and 2b.

b)Select System Setting.

c)Select Configuration Report.

d)Select Print Configuration Report Now.

e)Select Cancel.

7.Prepare for print driver installation.

a)Review the AppleTalk Settings: area of the Configuration Report page and verify that AppleTalk is enabled, the AppleTalk Name is correct, the AppleTalk Zone is correct (if used).

b)From the documentation package supplied with your printer, retrieve the CentreWare Network Services CD-ROMand the document entitled CentreWare Net- work Services Guide. Proceed to the next section of this procedure called Go to a Workstation and...

Macintosh Networks	(AppleTalk)
14.

Xerox Document Centre System Administration Guide Page 14 - 3