Xerox 490 ST, 480 ST manual Go to the Document Centre

Go to the Document Centre and...

1.Connect your Document Centre to the network with the appropriate cabling.

2.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enable Microsoft Network printing.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

4.Enable the Protocol and Media.

a)Press the Microsoft Networks button.

b)Press the Transport and Media button.

c)Press the Enable button to enable the Microsoft Network protocols.

d)If Physical Media buttons appear. Press the corresponding button to select either NetBEUI/Ethernet or NetBEUI/Token Ring. After making your selection press Save.

Page 8 - 2 Xerox Document Centre System Administration Guide