Xerox 480 ST, 490 ST manual Dynamic/Static IP Addresses, Before you start

3.Dynamic/Static IP Addresses and

WINS

Before you start

NOTE	Your Document Centre now has DHCP, LPR, and NetBIOS over
	the IP protocol enabled by default. If your DHCP server will
	provide host name, IP address, Gateway address, and Subnet Mask,
	the Document Centre TCP/IP information will be configured on
	initial boot.
	Your Document Centre printer can be connected to a variety of
	networks that use the TCP/IP protocol. You may either choose to
	allow the device to retrieve a dynamic address or you may select to
	enter one manually. This section contains procedures for both of
	these methods. Determine which method will be used for your
	network and follow the steps of the appropriate procedure.

3. Dynamic/Static IP Addresses and WINS

Xerox Document Centre System Administration Guide Page 3 - 1