7.Enter a UDP Port Number of the SNMP manager that will receive traps. The default is 162 (decimal).

8.Select the SNMP version that matches the version of the SNMP manager. The default is SNMP v1.

9.Enter the Trap Community Name.

10.Select the Traps to be Received:

Printer Traps

Job Monitoring Traps

Cold Start Generic Traps

Warm Start Generic Traps

Authentication Failure Generic Traps

NOTE

Authentication Failure Generic Traps must be enabled on the

 

SNMP Properties Configuration Page before you can select it.

 

 

11.Click Apply New Settings to accept the changes or Restore Settings to return the settings to their previous values.

To Add IPX Addresses to the Trap Destination

Addresses List:

1.Open your Web browser and enter the TCP/IP address of the Document Centre in the Address or Location field.

2.Click the Properties tab or click Properties in the directory tree.

3.Select Connectivity, then select Protocols in the directory tree.

16. Internet Services

Xerox Document Centre System Administration Guide

Page 16 - 61

Page 167
Image 167
Xerox 480 ST, 490 ST manual To Add IPX Addresses to the Trap Destination Addresses List