Xerox 480 ST, 490 ST manual NetWare Troubleshooting, NetWare troubleshooting steps

NetWare Troubleshooting

NetWare troubleshooting steps

This procedure assumes that the printer is turned on and, connected to a functioning network port with the correct cabling.

Obtain a Configuration Report from your printer.

1.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

d)Select System Setting.

e)Select Configuration Report.

f)Select Print Configuration Report Now.

g)Press the Cancel button.

h)Press the Exit Tools button.

2.Allow a minute for the Report to print.

17. Network Troubleshooting

Xerox Document Centre System Administration Guide Page 17 - 5