Xerox 490 ST, 480 ST manual Test scanning

Test scanning

A.Place the document that you want to scan in the Document Feeder, or place the first page on the Document Glass.

B.Select the Scan feature on the Document Centre Touch Screen.

C.Scan jobs are based on templates that contain programming selections for your job. Verify that default.xst is highlighted in the scan template list. This is the default template.

D.If desired, select More Scanning Features and modify the template by selecting options from the Scan Setups tab on the Document Centre Touch Screen. Note that any changes you make from the Touch Screen apply only to the current job.

The template settings will be restored after the completion of the scan job.

Page 20 - 30 Xerox Document Centre System Administration Guide