Xerox 480 ST Novell NetWare 4.X and 5.X NDS Networks, How to Connect to Ethernet or Token Ring

5.Novell NetWare 4.X and 5.X (NDS) Networks

Before You Start

NOTE	Your Document Centre may be installed on your network using
	Novell NDPS. The Xerox NDPS Agent, Documentation, and Print
	drivers are available from the Xerox Web Site www.xerox.com
	To enable 100BaseT or a Token Ring interface, refer to
	Chapter 2 How to Connect to Ethernet or Token Ring
	Networks to configure the Speed and Source Routing settings
	for your environment.
	The CentreWare software supplied with your printer can be
	used to set up your printer on your Novell network. For details
	refer to the document entitled CentreWare Network Services
	Guide.
	This procedure assumes you ran NWADMIN or PCONSOLE
	to set up a print server object. Please refer to the
	documentation supplied by Novell to complete those tasks.
	Record precisely (observe upper and lower case, dot notation
	etc.) the following: the NDS Tree, NDS Context Name,
	frame type, Print Server Name, and the Print Server
	password, that was assigned.

5. Novell NetWare 4.X and 5.X (NDS) Networks

Xerox Document Centre System Administration Guide Page 5 - 1