Xerox 480 ST, 490 ST manual Go to the Document Centre, Save

Go to the Document Centre and...

1.Connect your Document Centre to the network with the appropriate cabling.

2.Enter the Tools pathway.

a)Press the Access ( or ) button.

b)On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Enter the Network Setup menus.

a)Wait for the screen to refresh and press the Connectivity and Network Setup button.

b)Wait for the screen to refresh and press the Network Setup button.

4.Enable TCP/IP protocol.

a)Press the TCP/IP Options button.

b)Press the TCP/IP Settings button.

c)Press the Protocol and Media button.

d)Press the Enable button. If Physical Media buttons appear, select either Ethernet or Token Ring. Press Save.

5.Select either DHCP, BOOTP, or RARP as the dynamic address source.

a)Press the Dynamic Addressing button. By default, DHCP will be selected. To disable DHCP, choose another dynamic addressing method or Disabled. Press

Save.

6.To enter the IP address and Host Name.

a)Press the Name/Address button.

b)Press the soft buttons one at a time on the touch screen for each Octet of the IP address and enter the numbers from the keypad.

3. Dynamic/Static IP Addresses and WINS

Xerox Document Centre System Administration Guide Page 3 - 7