Xerox 480 ST, 490 ST manual Enable E-mail, Select Configuration Setup, Select Exit Tools

Enable E-mail

NOTE	If Tools is already up at the Document Center Touch Screen (from
	previous page) skip Step 1 and 2.
	1.	Access the System Administrator set up screens.
		a)	Press the Access ( or	) button.
		b)	On the keypad enter 1111 or the current password. Press
			the Enter button when finished. The Touch Screen will
			be used for the remainder of the data entry, unless
			instructed otherwise.
		c)	Press the Go to Tools button.
	2.	Enter Connectivity and Network Setup.
		a)	Wait for the screen to refresh and press the Connectivity
			and Network Setup button.
	3.	Enable E-mail:
		a)	Select More.
		b)	Select Configuration Setup.
		c)	At the Warning Screen Select Close.
		d)	Select Optional Services.
		e)	Select Scan to E-mail.
		f)	Select Enable.
		g)	Select Save.
		h)	Select Exit Tools.

21. E-mail

Xerox Document Centre System Administration Guide Page 21 - 5