8.Use the “ping” command to see if your printer responds. If the printer does not respond, you may have an addressing or network problem. Correct these conditions by checking and resetting IP addresses or cabling and retry.

9.Use the “ping” command to see if your gateway responds. If the gateway does not respond, you may have an addressing or network problem. Correct these conditions by checking and resetting IP addresses or cabling and retry.

10.Check your router, subnet (if applicable), and gateway addresses. (Incorrect addressing can render your lpr/lpd printing system unusable.)

Page 17 - 10

Xerox Document Centre System Administration Guide

Page 228
Image 228
Xerox 490 ST, 480 ST manual Xerox Document Centre System Administration Guide