Xerox 480 ST, 490 ST manual Administration Logon, How to change the Administrator Password, 1111

Administration Logon

The Network administrator factory default username and password for the embedded HTTP server is listed in the following table. It is the same logon that is required for access at the Document Centre. This logon is needed when modifying Document Centre properties using Internet Services. For details on modifying Properties see the section entitled Accessing the Document Centre Properties.

Embedded HTTP Server Administrator Logon

Administrator Username	admin
Administrator Password	1111

It is recommended that you change this password after the initial logon to prevent unauthorized access to the HTTP server.

How to change the Administrator Password.

1.Go to the Document Centre control panel.

2.Enter the Tools pathway.

a) Press the Access ( or ) button.

b) On the keypad enter 1111 or the current password. Press the Enter button when finished. The Touch Screen will be used for the remainder of the data entry, unless instructed otherwise.

c)Press the Go to Tools button.

3.Press the Access and Accounting button.

4.Press the Tools Mode Access button.

5.At the next screen, press the User Number field. When the background of this field turns black, use the numbers on the keypad to enter a new number. Record this number and keep in a safe place.

6.Press the Close button. Then press Exit Tools. Re-enter the Tools menu to validate the change has taken effect.

16. Internet Services

Xerox Document Centre System Administration Guide Page 16 - 11