Xerox 490 ST, 480 ST manual To Create an IPP printer

d)The Wizard will automatically detect the Printer Model for you. If that does not happen select Standard and choose the your Printer Model from the pull-down menu.

e)Click Finish. Go to Step 3.

To Create an IPP printer

a)Select Network Printer. Click Next.

b)Select Connect to a printer on the Internet or on your intranet. Type HTTP:// followed by the printer’s fully qualified Domain name or IP address in the URL field. The Printer Name can be either the Host Name or the SMB Host Name as shown on the configuration report, depending on the name resolution used by your network (WINS or DNS). Click Next.

c)Click OK to install the printer driver. Go to Step 3.

3.Select the driver to be used (Document Centre 480/470/460 drivers are included on the Windows 2000 CD-ROM).

a)A driver list will be displayed. Select Xerox from the Manufacturers: area. Then select the desired print driver from the Printers: and click OK. The driver will be installed.

b)The Default Printer window will open. Select Yes to make this the default printer, otherwise click the Next> button.

c)At the Completing the Add Printer Wizard screen, click the Finish button.

d)Print a Test Page. Verify that it prints. Repeat this Go to the Server Workstation and... procedure for each workstation on the network that will print to the printer.

Page 10 - 4 Xerox Document Centre System Administration Guide