1-24 Operations
1.3 Making Calls
An account code must be stored by pressing “ ” and entering the account code after the
line access code.
You can store an extension number, telephone number, or feature number of up to 24 digits.
Valid digits are “0 through 9”.
A pause can be stored by pressing the key. However, in the account code verify-all,
verify-toll and forced modes, “ ” is not regarded as a pause.
To store the telephone number of an external party, a line access code (9, 0 or 81 through
86) must be stored as the first digit.
The number of Personal Speed Dialing numbers corresponds to the number of PF buttons
assigned as One-Touch Dialing. (PF buttons are on a proprietary telephone.) You cannot
assign both the One-Touch Dialing and Personal Speed Dialing features to the same
number. For example, if you assign One-Touch Dialing to the PF 1 button and then Personal
Speed Dialing 0, only the Personal Speed Dialing 0 feature will be assigned.
A rotary telephone cannot use this feature.
1.2 Proprietary Telephone Settings, “Customizing the Button on Your Telephone”,
One-Touch Dialing Button
See the Installation Manual, Section 3, “Personal Speed Dialing”.
SLT
PT
!
!
Allows you to store up to 10 speed dial numbers at your extension. These numbers are
available for your extension only.

Storing a phone number

Any Telephone
Confirmation
tone
Lift the handset
or press
SP-PHONE/MONITOR
.
2 #
Dial 2 . Enter the personal speed
dial number (0 through 9).
personal speed dial no.
Enter the
desired number.
desired no.
Dial #. Hang up or press
SP-PHONE/MONITOR
.
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
#
Dial #. Enter the personal speed
dial number (0 through 9).
personal speed dial no.
You may dial “1 ” instead of “#”.
Dialing
Dialing with Personal Speed Dialing (Personal Speed Dialing)