1.7 Useful Features
1-66 Operations
• If you have more than one message at your extension,
the line connects you to the selected message sender. • The message is cleared after
the conversation.
Calling back the message notification senderClearing all message notifications by the message receiver
PT
Press MESSAGE.
MESSAGE
Lift the handset or press
SP-PHONE/MONITOR. Talk.
• All messages are cleared.
PT
Dial 700. Dial #.
7 0 0
Lift the handset or press
SP-PHONE/MONITOR. Hang up or press
SP-PHONE/MONITOR.
#
• Each extension can have a maximum of 8 simultaneous messages. If you try to set the ninth
message, you will hear a reorder tone.
• If the MESSAGE indicator does not go out after calling the extension which left the
message, another message is waiting.
• If multiple message notifications are left at your extension, call back is executed in the order
received.
• If you select a specific message to call back, the other call backs will be executed in the
order received, starting with the one selected.
(e.g.) 5 → 6 → 7 → 8 → 1 → 2 → 3 → 4
• 1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone”,
Restoring the MESSAGE Button
• See the Installation Manual, Section 3, “Message Waiting”.
PT
PT
PT
PT
!
!
☞
Checking and Selecting a message notification by the message receiver
If there is a message, the message waiting lamp (MESSAGE indicator) light will be on.
PT
Press MESSAGE repeatedly
until the desired message appears.
MESSAGE
When the telephone is idle and on-hook
• The stored messages are shown on the
display in the order they were received.