1.5 During a Conversation
Operations 1-39
Basic Operations
During a 5-party conference, you cannot use this feature.
With outside calls, you can put multiple calls on hold. However, with intercom calls, you
can put only one call on hold. One way around this is to use the Call Park feature. See two
pages ahead.
If a call is placed on hold for more than the programmed time, ringing or an alarm tone will
be heard (Hold Recall/Hold Alarm) and the following displays will be shown. While the
alarm tone is being sent, the LCD will flash.
Example:
— When holding extension 111, Mr. Brown: “111: Brown” will be displayed.
— When holding outside (CO) line, CO 1: “Call on CO 1” will be displayed.
If “Hold-2” or “Hold-3” is assigned by System Programming, you must dial “20” after
flashing the hookswitch.
Only an outside or intercom call can be placed on hold at one time. If you want to hold both
calls, use the Call Park feature.
1.5 During a Conversation, “Retrieving a Call on Hold (Call Hold Retrieve)”
1.5 During a Conversation, “Placing a Call in System Parking Area (Call Park)”
1.7 Useful Features, “Conference (5-party)”
See the Installation Manual, Section 3, “Hold”.
SLT
SLT
PT
PT
PT
Prevents other extension users from retrieving your held call. Only the user who held the
call can retrieve it.

Placing a call on exclusive hold

PT
Press HOLD.
HOLD
Press HOLD again.
HOLD
During a conversation
The CO or INTERCOM indicator light flashes green slowly.
The current call is placed on hold.
The CO or INTERCOM indicator light flashes green
moderately.
The current call is placed on exclusive hold.
Placing a Call on Hold Exclusively (Exclusive Hold)
PT
Press the CO or INTERCOM
which is on exclusive hold.
CO
or
INTERCOM

Retrieving a call on exclusive hold

The CO or INTERCOM indicator light turns steady green.
The held call is released.