1.5 During a Conversation
1-44 Operations
Transferring a Call to an Outside (CO) Line (Call Transfer – to Outside (CO) Line)
Allows you to transfer a received call to an external party.
System Programming is required to execute this feature.
PT
Press TRANSFER. Enter the phone
number where the
call will be transferred.
TRANSFER
phone no.
During a conversation
Hang up or
press
SP-PHONE.
Confirmation tone
and dial tone Announce.Wait for
an answer.
line access code
CO
Press a CO or enter
a line access code
(9, 0 or 81 through 86).
• The current call is placed on hold. • The call is transferred.
• If a CPC or reverse signal is sent to an outside (CO) line before the assigned time limit, a
call between two external parties will be disconnected.
• If a call between two external parties is established, an alarm tone is sent to both parties
15 seconds before the assigned time limit (default: 10 minutes). “Hold Recall” is sent to the
transferring extension 50 seconds before time out.
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination party answers.
• If you want to join the conversation after transferring the call, press the corresponding CO
button. A conference call is established.
• To change the party where the call is transferred before hanging-up, press the CO button
whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer
procedure.
• See the Installation Manual, Section 3, “Call Transfer – to Outside (CO) Line”.
PT
PT
PT
PT
PT
!
!
☞