5 Special Features
Section 5
5-A Handset Locator
You can locate the handset or page the handset.
1 Press (HANDSET\LOCATOR) on the base unit.
³The IN USE/CHARGE indicator flashes and the handset beeps for 1 minute.
2 To stop paging, press (HANDSET\LOCATOR) again or press (TALK) twice on the handset.
5-B Automatic Security Code Setting
(TALK)
(AUTO) 
Whenever you place the handset on the base unit, the unit automatically selects one of 65,000 security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user.
5-C How to use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users)
(RECALL) | We recommend you press (PAUSE) if a pause is required for dialling with a PBX or to access a long | ||
distance service. |
| ||
(PAUSE) | Ex: Line access number (9) (PBX) | ||
(PROGRAM) | (9) (PAUSE) | Phone number | |
³Pressing (PAUSE) once creates a 3.5 second pause. This prevents misdialling when you redial or | |||
| |||
| dial a stored number. |
| |
| ³Pressing (PAUSE) more than once increases the length of the pause between numbers. | ||
IN USE/CHARGE Indicator
(HANDSET\LOCATOR)
5-D RECALL Button
Pressing (RECALL) allows you to use special features of your host PBX such as transferring an extension call or accessing a special telephone services (optional), such as call waiting.
Selecting the recall time
The recall time depends on your telephone exchange or host PBX. You can select the following recall times: “90, 100, 110, 250, 300, 400, 600 or 700 msec (milliseconds)”.
The TALK indicator light must be off before programming.
Press (PROGRAM) | Dialing button ( 1 | to 8 ) | (AUTO) (RECALL). | |||
| 1 | : 90 msec | 2 : 100 msec | 3 : 110 msec | 4 : 250 msec | |
| 5 | : 300 msec | 6 | : 400 msec | 7 : 600 msec | 8 : 700 msec |
³A beep sounds.
³If 3 beeps sound after programming, a wrong key was pressed. Start again from the beginning. ³Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at 100
msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to operate this service.
³If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting.
³When you receive a second call during a conversation, you will hear a signal tone following the call waiting tone and the conversation will be interrupted for approximately a second. The tones are generated from the telephone company. This is not fault of the product as these events are normal.
For Call Waiting Service Users in New Zealand
Make sure the recall time is set to 600 msec for use with Telecom’s Call Waiting Service. Press (RECALL) if you hear a
³The first call is put on hold and you can answer the second call. ³To return to the first caller, press(RECALL) again.
