Panasonic KX-TCA391ALN Registering Portable Units, Press FUNCTION/EDIT until 2 beeps sound

– 3 –

the portable unit.

• The portable unit number (1 to 4) will be displayed on

• A beep sounds on the base unit and portable unit.

• The IN USE indicator on the base unit goes out.

OK (Save key).

8 Press

9 Press (EXIT/CH) to return to the standby mode.

OK (Yes key).

While “Assign” is at the arrow, press

OK (Yes key).

Press or repeatedly until the desired portable unit number (1 to 4) is displayed. (Ex. “2” is selected.)

• The selected number is displayed.

Registering Portable Units!

Registration is necessary for portable units. A portable unit will be assigned the number at registration. The portable unit number is used when paging and transferring calls. You can register up to 4 portable units at the base unit.

You can not assign the same number to more than one portable unit. To confirm the portable unit number, place the portable unit on the charger.

Make sure that the portable unit and base unit are in the standby mode. Registration must be completed within 1 minute.

1

2

3

Base unit:

Press (FUNCTION/EDIT) until 2 beeps sound.

Press (*).

•The IN USE indicator flashes.

Portable unit:

Press (FUNCTION/EDIT).

11:34AM 12/25

SAVE AUTO# ?

11:34AM 12/25

UNIT ASSIGN

HSave directory Ringer volume

GF HOK=Yes

4

5

6

7

Press or repeatedly until the arrow points to “Program”, then press OK (Yes key).

Press or repeatedly until the arrow points to “Unit option”, then press

HProgram

GF HOK=Yes

Set recall time HUnit option

GF HOK=Yes

HAssign

Erase

GF HOK=Yes

Unit No

:2

GF HOK=Save

–2–