Panasonic KX-TCD150E Connections, Battery installation, Battery charge, Location

TCD150E(E).book Page 5 Wednesday, May 25, 2005 4:58 PM

Preparation

Connections

Hooks

To telephone network

(220–240 V,

50 Hz)

Use only the included AC adaptor and telephone line cord.

Note:

LNever install telephone wiring during a lightning storm.

LDo not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We therefore recommend you also connect a standard telephone to the same telephone line using a T-adaptor. Your Panasonic sales shop can offer you more information about connection possibilities.

LTo turn the power on, press {ih} for about 1 second.

LTo turn the power off, press {ih} for about 2 seconds.

Location

For maximum distance and noise-free operation, place your base unit:

−Away from electrical appliances such as TVs, radios, personal computers or other phones.

−In a convenient, high and central location.

Battery installation

Insert the batteries negative (T) terminal first. Close the handset cover.

Note:

LUse only rechargeable batteries (page 2).

Battery charge

Place the handset on the base unit for about 7 hours before initial use.

Battery strength

Battery icon	Battery strength
054	Fully charged.
5	High
6	Medium
7	Low
074	Needs to be charged.

Battery life

Panasonic Ni-MH batteries (700 mAh)

Operation	Operating time
While in use (talking)	10 hours max.
While not in use	120 hours max.
(standby)

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 5