Panasonic KX-TCD440NZ Guide to base unit settings, Base unit settings, Adjusting ringer volume

Useful Telephone Settings

Guide to base unit settings

For your reference, a chart of all items which can be customised for the base unit is printed below. Details of each item can be found on the corresponding pages.

Code	Feature	Page
No.	(Default setting)
{0}	Reset base unit	page 24
{1}	Set all or selected	page 32
	handsets to ring
	(All handsets ring)
{2}	Base unit ringer	page 22
	volume (Medium)
{3}	Recall time (600 ms)	page 22
	Pause length	page 23
	(3 seconds)
{5}	Change base unit	page 22
	PIN (“0000”)
{6}	Call restriction	page 23
	Emergency number	page 24
	(“111”, “911” and
	“999”)
{7}	Cancel a handset*1	page 31
{*}	Time and date	page 9

*1 If you cancel a handset, the base unit will “forget” the handset registration.

Base unit settings

Changing base unit PIN (Personal Identification Number)

The base unit’s default PIN is “0000”.

Important:

L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {5}.

4Enter the current 4-digit base unit PIN.

5Enter the new 4-digit base unit PIN.

6Enter the new 4-digit base unit PIN again.

7Press {ih}.

Adjusting ringer volume

4 levels (high to off) are available.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {2} 2 times.

4Select the desired setting by pressing {1} for low, {2} for medium, {3} for high or {0} for off.

5Press {>}, then press {ih}.

Setting recall time

Change the recall time if necessary to suit your PBX or service provider. For further information, consult your nearest Panasonic service centre.

1Press {j}.

2Press {v} repeatedly to display

22