1.7 Useful Features
1-68 Operations
In the Verify-All and Verify-Toll modes, you must always enter a pre-assigned account
code.
You do not need to make an account code entry when receiving incoming calls.
You can clear and re-enter a number by pressing “ ” or the FWD/DND button while
entering an account code.
An account code can be stored into Memory Dialing (“One-Touch Dialing”, “Pickup
Dialing”, “System/Personal Speed Dialing”, “Call Forwarding — to Outside (CO) Line”).
The sequence to enter an account code into Memory Dialing is as follows.
— [Feature Number] [Line Access Code] [ ] [Account Code] [Phone Number]
If an entered account code does not match the pre-assigned account code in the verify-all
mode or the verify-toll mode, when making an outside call, a reorder tone is heard.
An account code has 4 digits (0 through 9). FLASH, PAUSE, etc. cannot be used.
1.8 Operator/Manager Service Features, “Extension Password Set (Manager only)”
See the Installation Manual, Section 3, “Station Message Detail Recording (SMDR)”.
See the Installation Manual, Section 3, “Account Code Entry”.
See the Installation Manual, Section 3, “Toll Restriction Override by Extension Password”.
PT
!
!
Technical Manuals Online! - http://www.tech-man.com