Panasonic KX-TDA200 PT Programming, Programming Instructions, Required Telephone/Extension, Next

2.1 PT Programming

2.1PT Programming

2.1.1Programming Instructions

Required Telephone/Extension

PBX settings can be customised through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-T7636. To access system programming, the Class of Service (COS) assigned to the PT's extension must be programmed to allow system programming, or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.

Only one system programming session can be performed at a time. This means that only one user can access system programming at a time, whether through a PT or PC.

For a list of characters that can be entered during system programming, see Section 1.1.3 Entering Characters.

Buttons and Functions

Fixed Buttons

Function

T7600/NT136 T7200/T7400/T7500*

REDIAL	PREVIOUS
	NEXT
SP-PHONE

	FWD/DND		(Page up)
		CONF	(Page down)
AUTO DIAL			ENTER
	STORE
		—	Back to Previous Menu
			(CANCEL)

SHIFT

SHIFT

SHIFT

PAUSE

PROGRAM PAUSE

PROGRAM

HOLD

HOLD

END

18

PT Programming Manual