TG161xBX(e).book Page 22 Wednesday, October 19, 2011 8:45 AM
Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. The characters that can be entered depend on the character entry mode (page 22).
–Press {3} or {4} to move the cursor left or right.
–Press dial keys to enter characters and numbers.
–To erase a character or number, place the cursor to the right of where you want to erase the character or number, then press {C}.
–Press *(A→a) to switch between uppercase and lowercase.
–To enter another character located on the same dial key, press {4} to move the cursor to the next space, then press the appropriate dial key.
–If you do not press any dial key within 5 seconds after entering a character, the character is fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric
1(o), Extended 2 (H), and Cyrillic (I). When in these entry modes except Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen: {k} s{r}: Select a character entry mode. s{j/OK}
Note:
Lin the following tables represents a single space.
Alphabet character table (ABC)
Numeric entry table
Greek character table (M)
22
