TG161xBX(e).book Page 25 Wednesday, October 19, 2011 8:45 AM

 

Useful Information

 

 

Programmable settings

 

 

 

Problem

Cause/solution

The display is in a language I

L Change the display language (page 10).

cannot read.

 

 

 

Battery recharge

 

 

 

Problem

Cause/solution

The handset beeps and/or 8

L Battery needs charging. Fully charge the batteries

displays.

(page 8).

I fully charged the batteries, but

L Clean the battery ends (S, T) and the charge

– battery level does not increase or

contacts with a dry cloth and charge again.

the operating time seems to be L It is time to replace the batteries (page 7). shorter.

Making/answering calls, intercom

Problem

Cause/solution

w is flashing.

L The handset is too far from the base unit. Move

 

closer.

 

L The base unit’s AC adaptor is not properly

 

connected. Reconnect AC adaptor to the base unit.

 

L The handset is not registered to the base unit.

 

Register it (page 27).

Noise is heard, sound cuts in and

L You are using the handset or base unit in an area

out.

with high electrical interference. Re-position the

 

base unit and use the handset away from sources of

 

interference.

 

L Move closer to the base unit.

 

L If you use a DSL/ADSL service, we recommend

 

connecting a DSL/ADSL filter between the base unit

 

and the telephone line jack. Contact your DSL/ADSL

 

provider for details.

 

L Unplug the base unit’s AC adaptor to reset the unit

 

and turn off the handset. Reconnect the adaptor, turn

 

on the handset and try again.

The handset does not ring.

L The ringer volume is turned off. Adjust ringer volume

 

(page 12).

I cannot make a call.

L The dialling mode may be set incorrectly. Change

 

the setting (page 10).

LThe handset is too far from the base unit. Move closer and try again.

LAnother unit is in use.*1 Wait and try again later.

*1 KX-TG1612

25

Page 25
Image 25
Panasonic KX-TG1611BX, KX-TG1612BX Programmable settings, Battery recharge, Making/answering calls, intercom