21
Useful Information
Pressing {R} does not
display/dial the last
number dialled.
LThe redialled number was more than 24 digits long. Redial
the number manually.
I fully charged the
batteries, but 074
still flashes.
LClean the charge contacts and charge again (page 9).
LIt is time to replace the batteries (page 9).
I fully charged the
batteries, but the
operating time seems to
be short.
LWipe the battery ends (S, T) and the unit contacts with a
dry cloth. Charge the batteries for 7 hours before reuse.
Caller information is not
displayed.
LYou must subscribe to Caller ID service.
LYour unit is connected to a telephone line with ADSL
service. We recommend connecting a filter (contact your
ADSL service provider) to the telephone line between the
base unit and the telephone line socket.
LCaller has withheld information.
I cannot remember the
PIN.
LChange the PIN (page 21).
Registering a handset Changing the PIN
1{j/OK} i “SETTING HS” i {>}
2“REGISTRATION” i {>}
3“REGISTER HS” i {>}
4Press and hold {x} on the base unit for
about 5 seconds.
LIf all registered handsets start ringing,
press {x} to stop, then start again
from step 1.
LThe rest of the procedure must be
completed within 1 minute.
5Press {e} or {v} to select a base unit
number. i {>}
6Wait until “BS PIN” is displayed. i
Enter base unit PIN (default: “0000”).
i {>}
LIf you forget your PIN, see page 21.
LA confirmation tone will sound, and
w will stop flashing.
LIf w is still flashing, start again from
step 1.
Handset PIN:
1{j/OK} i “SETTING HS” i {>}
2“OTHER OPT” i {>}
3“HSPIN CHANGE” i {>} i
{*}{7}{0}{0}{0}
4Enter the new 4-digit handset PIN.
5Enter the new 4-digit handset PIN
again. i {ih}
Base unit PIN:
1{j/OK} i “SETTING BS” i {>}
2{5} i {*}{7}{0}{0}{0}
3Enter the new 4-digit base unit PIN.
4Enter the new 4-digit base unit PIN
again. i {ih}
Problem Cause & solution
TG1811_1812_1813AL(e-e).book Page 21 Friday, May 12, 2006 2:25 PM