Preparation
14
Setting the date and time
Important:
LConfirm that the AC adaptor is connected.
LEnsure that w is not flashing. If the
handset is in screen saver mode, w is not
displayed. Press {ih} to turn the
display on.
1Press $ (middle soft key).
2Select b, then press ,.
3Select Set Date & Time, then press
,.
4Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
5Enter the current hour and minute by
selecting 2 digits for each.
LYou can select AM, PM or 24-hour
time entry by pressing {*} repeatedly.
Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*}
repeatedly until 03:30 PM is
displayed.
6Press ,.
7Press {ih}.
Note:
LTo correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
LThe date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TG1850AL(e).book Page 14 Monday, December 6, 2004 9:10 PM