Special Features
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
41
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press
Pause
or
P
if a pause is
required to dial with a PBX or to make a long distance call.
Ex. Line access number
[9]
(PBX)
[9]
Pause
or
P
•Pressing
Pause
or
P
once creates a 3.5 second pause.
This prevents misdialing when you dial after confirming
the entered number (p. 23) or dial a stored number (p. 36).
•Pressing
Pause
or
P
more than once increases the length of the pause between
numbers.
FLASH Button
Pressing
[FLASH/CALL WAIT]
allows you to use special features of your host PBX
such as transferring an extension call, or access optional telephone services such
as call waiting.
•Pressing
[FLASH/CALL WAIT]
cancels the following operations:
—temporary tone dialing, or
—muting your conversation.
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
•If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[]
or
[]
, then press
Select
.
3
Scroll to “
Set tel line
” by pressing
[]
or
[]
, then press
Select
.
4Scroll to “Set flash time” by pressing []
or [], then press Select.
5Select the desired time by pressing [] or [].
6Press Save, then press [OFF].
Handset
9P15556667777Clear Pause
9P1234567890
=Next P
▲
>
OR
Example
Phone number
Handset Base Unit
Handset
>
>
Initial setting
Exit Select
>
>
>
>
Set tel line
Back Select
>
>
>
>
Set flash timeBack Select
>
>
>
>
Set flash time
:700ms
Back Save
>
>