4Things You Should Know

4-E Wall Mounting

This unit can be mounted on a wall phone plate.

4-F Base Unit Location/Noise

Calls are transmitted between the base unit and handset using

1

2

Press the tabs in the direction of the arrows (#), then remove the wall mounting adaptor ($).

Connect the AC adaptor.

Fasten the AC adaptor cord to prevent it from being disconnected.

1 1

2

Hook

To

Power

Outlet

wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is:

Away from electrical appliances

In a HIGH and CENTRAL

such as a TV, personal computer

location with no obstructions

or another cordless phone.

such as walls.

Raise the antenna.

Note:

If you use the handset near a microwave oven which is being used, noise may be heard from the receiver or the speaker. Move away from the microwave oven and closer to the base unit.

If you use the handset near another cordless phone’s base unit, noise may be heard. Move away from the other cordless phone’s base unit and closer to your base unit.

3Tuck the telephone line cord inside the wall

mounting adaptor, then push the adaptor in the direction of the arrows (# and $) while pressing the tabs.

The word “UP WALL” should face upward.

4Connect the telephone line cord. Mount the unit,

then slide it down.

Raise the antenna.

2

1

4-G Specifications

Base unit

Power Supply:AC Adaptor (120 V AC, 60 Hz)

Power Consumption:

Standby: Approx. 2.1 W

 

Maximum: Approx. 5.0 W

Frequency:

2.4 GHz–2.48 GHz

Dimensions (H x W x D):

Approx. 124 mm x 155 mm x 174 mm

Mass (Weight):

(4 78" x 6 332" x 6 2732")

Approx. 330 g (0.73 lb.)

Handset

Power Supply:Ni-MH battery (3.6 V, 830 mAh)

Frequency:2.4 GHz–2.48 GHz

Dimensions (H x W x D): Approx. 208 mm x 52 mm x 39 mm

 

(8 3⁄ " x 2

1⁄ " x 1

17⁄ ")

Mass (Weight):

16

16

32

Approx. 190 g (0.42 lb.)

 

Security Codes:

1,000,000

 

 

Dialing Mode:

Tone (DTMF)/Pulse

 

Operating Environment: 5°C–40°C(41°F–104°F) Specifications are subject to change without notice.

5To charge the handset battery: Place the handset on the base unit.

The unit beeps once and

the CHARGE indicator lights.

For assistance, please call: 1-800-211-PANA(7262)

Page 6
Image 6
Panasonic KX-TG2302 operating instructions Things You Should Know, Wall Mounting, Base Unit Location/Noise, Specifications