Preparation
10 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the base unit

Connecting the AC adaptor and

telephone line cord

Connect the telephone line cord until it
clicks into the base unit (A) and telephone
line jack (B). Connect the AC adaptor cord
by pressing the plug firmly (C).
LUse only the included Panasonic AC
adaptor PQLV19 or PQLV255.
Note:
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
LThe AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
LThe unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a Panasonic T-adaptor (page
6). Emergency power can be supplied to
the unit by connecting a Panasonic
battery back-up power supply noted on
page 6.
To single-line
telephone jack
(RJ11C)
(120 V AC,
60 Hz)
Hook
C
A
B
TG2631_2632.book Page 10 Monday, December 26, 2005 2:02 PM