Caller ID Service
Note:
LYou can also press {Rcvd calls} to enter the caller list.
LCalling back will not be possible if the caller information does not include a phone number.
LIn some cases, you may have to edit the number before dialing. (For example, you may have to delete “1” and the area code.)
L
Displayed symbols
LIf the same caller calls more than once, it will be displayed with the number (“×2” to “×9”). Only the date and time of the most recent call will be stored.
LA Q is displayed next to items which have already been viewed or answered on this handset.
Editing a caller’s phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
1
2 Press {V} or {^} repeatedly to display the desired item.
3 Press {Edit} repeatedly until the phone number is shown in the desired format. Each time you press {Edit}, the phone number will be rearranged into one of 3 patterns.
1Local phone number Example:
2Area code – Local phone number Example:
31 – Area code – Local phone number
Example: 1-555-321-5555
4 To return a call, press {C} or {s}.
Caller ID number auto edit feature
Once you call back an edited number (see “Editing a caller’s phone number before calling back”), the unit can automatically edit other incoming phone numbers each time you receive a call.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list (see “Editing a caller’s phone number before calling back”), then call that number. After that, calls from that caller’s area code will be edited automatically.
This feature can be turned on or off (page 39). The default setting is ON.
28For assistance, please call
