Panasonic KX-TG5433 Other options, Line mode, Handset key tone, Re-registering the handset

Programmable Settings

Note:

LThe setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call.

LIf the unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting.

Line mode

The line mode is preset to “B” and generally should not be adjusted. If “Line in use” on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to “A”.

1 Press {MENU}.

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Set tel line” by pressing {V} or {^}, then press {>}.

4 Scroll to “Set line mode” by pressing {V} or {^}, then press {>}.

5 Press {V} or {^} repeatedly to select the desired setting.

6 Press {Save}, then press {OFF}.

Other options

Handset key tone

You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. The default setting is ON.

1 Press {MENU}.

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Key tone” by pressing {V} or {^}, then press {>}.

4 Press {V} or {^} repeatedly to select “On” or “Off”.

5 Press {Save}, then press {OFF}.

Re-registering the handset

If “No link to base. Move closer to base, try again.” is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit.

Important:

LMake sure the base unit is not being used.

LHave the handset and base unit near each other when re-registering the handset.

LKX-TG5432 and KX-TG5433 only: Confirm the extension number of the handset which has lost its link to the base unit by placing the handset on the base unit or charger.

If you accidentally assign another handset’s extension number to it, the other extension will stop functioning.

For assistance, please call 1-800-211-PANA (7262). 41