| Useful Information |
|
|
|
|
Troubleshooting |
|
General use |
|
|
|
Problem | Cause/solution |
The unit does not work. | LMake sure the battery is installed correctly and fully |
| charged (page 14, 15). |
| LCheck the connections (page 13). |
| LUnplug the base unit’s AC adaptor to reset the unit. |
| Reconnect the adaptor and try again. |
| LThe handset has not been registered to the base unit. |
| Register the handset (page 46). |
I cannot hear a dial tone. | LConfirm the telephone line cord is properly connected |
| (page 13). |
| LDisconnect the unit from the telephone line and connect |
| a known working telephone. If the working telephone |
| operates properly, contact our service personnel to |
| have the unit repaired. If the working telephone does |
| not operate properly, contact your telephone company. |
|
|
Programmable settings |
|
|
|
Problem | Cause/solution |
I cannot program items. | LWhile another user is listening to messages or the |
| answering system is answering a call, you cannot |
| program items. Try again later. |
|
|
While programming, the | LA call is being received. Answer the call and start again |
handset starts to ring. | after hanging up. |
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
I charged the battery fully, | LClean the charge contacts and charge again (page 15). |
but 7continues to | LThe battery may need to be replaced with a new one |
flash, or 8is | (page 14). |
displayed. |
|
|
|
The handset display is | LConfirm that the battery is properly installed. |
blank. | LFully charge the battery (page 15). |
|
|
For assistance, please visit http://www.panasonic.com/phonehelp | 51 |