Panasonic KX-TG5934AL Transferring calls between handsets, conference calls, Multi-unit Operation

TG593xAL.book Page 43 Tuesday, April 11, 2006 10:31 AM

Multi-unit Operation

Base unit

1 Press {SELECT} repeatedly to display the desired handset number. i

{CALL}

LThe handset beeps for 1 minute.

2 To end the intercom call, press {CALL}.

Answering an intercom call

Handset

1 Press {C} to answer the page.

2 To end the intercom call, press {OFF}.

Base unit

1 Press {CALL} to answer the page.

2 To end the intercom call, press {CALL}.

Note:

LWhen the ringer volume is set to off, the handset or the base unit rings at the low level for intercom calls.

Transferring calls between handsets, conference calls

Available model(s): KX-TG5932/KX-TG5933/KX-TG5934

Outside calls can be transferred between 2 handsets. 2 handsets can have a conference call with an outside party.

1 During an outside call, press {INTERCOM} to put the call on hold.

2 To page another handset, enter its extension number ({1} – {4}).

L{4} can be used if you have 4 handsets.

3 Wait for the paged party to answer.

LIf the paged party does not answer, press {C} to return to the outside call.

4 To complete the transfer, press {OFF}.

LThe outside call is being routed to another handset.

To establish a conference call, press {Conf}.

LTo leave the conference, press {OFF}. The other parties can continue the conversation.

LTo put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}.

43