Panasonic KX-TG6513BX, KX-TG6519BX, KX-TG6512BX, KX-TG6511BX, KX-TG5511BX For your safety

TG5511_6511_6521BX(e).book Page 5 Tuesday, June 8, 2010 9:17 AM

Important Information

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

LUse only the power source marked on the product.

LDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

LCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

LRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre.

LUnplug from power outlets and never touch the inside of the product if its casing has been broken open.

LNever touch the plug with wet hands. Danger of electric shock exists.

Installation

LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

LDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

LDo not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

LUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

LDo not disassemble the product.

LDo not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.

Medical

LConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.88 GHz to 1.90 GHz, and the RF transmission power is 250 mW (max.).)

LDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

CAUTION

Installation and location

LNever install telephone wiring during an electrical storm.

LNever install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.

LNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

LUse caution when installing or modifying telephone lines.

LThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

LThis product is unable to make calls when:

–the handset batteries need recharging or have failed.

–there is a power failure.

–the key lock feature is turned on.

5