2When the other party answers,
speak into the microphone.
RSpeak alternately with the other
party.
3When you finish talking, press
MSP-PHONEN.
Note:
RFor best performance, use the
speakerphone in a quiet environment.
RWhile on a call, you can switch from
the base unit to the handset:
– Press MN on the handset, then
press MSP-PHONEN on the base
unit with the call sharing mode on
(page 27).
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press MjN or MkN repeatedly while
talking.
Answering calls

Using the handset

When a call is being received, the ringer
indicator flashes rapidly.
1Lift the handset and press MN or
MN when the unit rings.
RYou can also answer the call by
pressing any dial key from 0 to
9, *, or #. (Any key answer
feature)
2When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting
the handset off the base unit or charger.
You do not need to press MN. To turn
this feature on, see page 26.
Adjusting the handset ringer volume
nWhile the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to
select the desired volume.
nProgramming the volume
beforehand:
1MMENUN#160
2MbN: Select the desired volume.
3MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing MN.

Using the base unit

When a call is being received, the
SP-PHONE indicator flashes rapidly.
1Press MSP-PHONEN when the unit
rings.
2Speak into the microphone.
3When you finish talking, press
MSP-PHONEN.
Adjusting the base unit ringer volume
Press MjN or MkN repeatedly to select
the desired volume.
RTo turn the ringer off, press and hold
MkN until the unit beeps.
Note:
REven when the ringer volume is set to
off, the base unit still rings for
intercom calls (page 43).
16 For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls