Useful Information
Problem | Cause/solution |
The 2nd caller’s | L In order to use Caller ID, call waiting, or Call |
information is not | Waiting Caller ID (CWID), you must first contact |
displayed during an | your service provider/telephone company and |
outside call. | subscribe to the desired service. |
| After subscribing, you may need to contact your |
| service provider/telephone company again to |
| activate this specific service, even if you already |
| subscribed to both Caller ID and Call Waiting with |
| Caller ID services (CWID). |
|
|
Answering system |
|
|
|
Problem | Cause/solution |
The unit does not record | L The answering system is turned off. Turn it on |
new messages. | (page 32). |
| L The message memory is full. Erase unnecessary |
| messages (page 33). |
| L The recording time is set to “Greeting only”. |
| Change the setting (page 37). |
| L If you subscribe to a voice mail service, messages |
| are recorded by your service provider/telephone |
| company, not your telephone. Change the unit’s |
| number of rings setting or contact your service |
| provider/telephone company (page 37). |
I cannot operate the | L Someone is using the unit. Wait for the other user |
answering system. | to finish. |
| L A caller is leaving a message. Wait for the caller to |
| finish. |
| L The handset is too far from the base unit. Move |
| closer. |
I cannot operate the | L The remote access code is not set. Set the remote |
answering system | access code (page 35). |
remotely. | L You are entering the wrong remote access code. If |
| you have forgotten your remote access code, |
| enter the remote access code setting to check |
| your current code (page 35). |
| L Press each key firmly. |
| L The answering system is turned off. Turn it on |
| (page 36). |
46For assistance, please visit http://www.panasonic.com/help
