4
Using the Alarms Section 4
The charger unit features an alarm clock. You can set the alarm to
play the radio or to sound a buzzer at a set time.
The radio alarm and the buzzer alarm can be set separately.
For assistance, please call: 1-800-211-PANA(7262)
[OFF]
[
-
, TUNE/CLOCK]
[AM/FM, RADIO]
Memory Buttons ([M1],[M2],[M3],[M4] and [M5])
[SNOOZE/MUTE]
[RADIO, ALARM DISPLAY/SET]
[BUZZER, ALARM DISPLAY/SET]
VOLUME
Control
[+, TUNE/CLOCK]
4-A Setting the Radio Alarm
1Press[AM/FM, RADIO] to turn the radio on.
2Press[AM/FM, RADIO] to switch between AM and FM.
3Tune in to the desired station by pressing [–, TUNE/CLOCK]or
[+, TUNE/CLOCK].
OR
Press the desired memory button ([M1]to [M5]).
4Adjust the volume by using the VOLUME control.
5Press and hold [RADIO, ALARM
DISPLAY/SET](the button on the top of
the unit) until the time flashes.
6Set the alarm time by pressing
[–, TUNE/CLOCK]or [+, TUNE/CLOCK].
•Pressing and holding [–]or [+] changes
the time faster.
7Press and release [RADIO, ALARM DISPLAY/SET]to save the
radio alarm time and the station.
•The time stops flashing and returns to the current time.
•“ ” is displayed while the radio alarm is turned on.
8Press[OFF] to turn the radio off.
•The radio will automatically turn on at the set time and will turn off
after 1 hour.
•You can exit alarm setting mode any time by pressing [OFF].
•The buzzer will sound at the set radio alarm time if you did not turn
the radio on in step 1.
•To change only the radio alarm time, repeat steps 5 to 7.
•If a power failure occurs, the radio alarm time and station preset will
be retained forabout 10 minutes.
To confirm the radio alarm time and station:
Press and release [RADIO, ALARM DISPLAY/SET].
•The alarm time and the station will be displayed for about 3 seconds.
To stop the alarm temporarily (SNOOZE)
Press[SNOOZE/MUTE].
•The alarm will then start again in 6 minutes. You can press
[SNOOZE/MUTE]again to stop the alarm.
To stop the alarm for the day
Press[OFF].
•The setting remains and the alarm will sound daily until you stop
the alarm completely. “ ” and/or “ ” will remain on
the display.
To stop the alarm completely
1. While the alarm is sounding or the SNOOZE mode is on, press
[OFF], then follow step 2.
OR
If the alarm is not sounding or the SNOOZE mode is not used, go
to step 2.
2.
Press[RADIO, ALARM ON/OFF] or [BUZZER, ALARM ON/OFF]
to turn the alarm off.
•“ ” or “ ” disappears from the display.
•To turn the alarm on again, press [RADIO, ALARM ON/OFF]
or[BUZZER, ALARM ON/OFF].
4-B Setting the Buzzer Alarm
1Press and hold [BUZZER, ALARM
DISPLAY/SET](the button on the top of
the unit) until the time flashes.
2Set the alarm time by pressing
[–, TUNE/CLOCK]or [+, TUNE/CLOCK].
•Pressing and holding [–]or [+] changes the time faster.
3Press and release [BUZZER, ALARM DISPLAY/SET]to save
the buzzer alarm time.
•The time stops flashing and returns to the current time.
•“ ” is displayed while the buzzer alarm is turned on.
•The buzzer will start at the set time and will automatically stop
after 10 minutes.
•You can exit alarm setting mode any time by pressing [OFF].
•If a power failure occurs, the buzzer alarm time will be retained for
about 10 minutes.
To confirm the buzzer alarm time:
Press and release [BUZZER, ALARM DISPLAY/SET].
•The alarm time will be displayed for about 3 seconds.
[OFF]
[RADIO, ALARM ON/OFF]
[BUZZER, ALARM ON/OFF]
[SNOOZE/MUTE]
4-C Stopping the Alarm
When the alarm sounds at the set time, “ ” is displayed and
“ ” and/or “ ” flashes.