Chapter 7 Troubleshooting

Typical Alarms and Conditions

The following table describes typical alarms and conditions for the

EMS−UGK. For further help, please contact the Help Desk.

To silence the horn, press any button.

To view the active alarms or alarm history, select EVENTS on the optional display, then ACTIVE EVENTS or HISTORY.

If the optional display is not installed, view the data through your communication interface.

Alarm or Condition

Possible Cause

Action

 

 

 

The EMS−UGK appears

Need to cycle power.

Activate the reset switch on the bottom of the

frozen or locked up.

 

electronics module: hold the switch for 10 seconds

 

 

or until the display (if installed) turns off, then

 

 

release the switch.

 

 

 

Service and Support

If you have any questions or problems with the EMS−UGK, call your Local Distributor or the Help Desk at one of the following telephone numbers and ask for an EMS−UGK technical representative:

United States: 1−800−356−5737 or 1−919−870−3149

Canada:1−800−461−9166 ext 260

All other countries: Call your local service representative

Please have the following information ready when you call for service:

SModel number

SSerial number

SDate of failure or problem

SSymptoms of failure or problem

SCustomer return address and contact information

EATON Powerware® Energy Management System (EMS) Upgrade Kit User’s Guide S 164201724 Rev 1 www.powerware.com

61

Page 67
Image 67
Powerware 208/120V, 400/230V, 380/220V, 415/240V manual Typical Alarms and Conditions, Service and Support

415/240V, 380/220V, 208/120V, 400/230V specifications

The Powerware series of uninterruptible power supplies (UPS) is renowned for its versatility and reliability in providing essential power protection for critical equipment across various environments. Specifically, the configurations of 208/120V, 400/230V, 380/220V, and 415/240V cater to a wide range of geographic voltage standards, making it an ideal solution for diverse industrial and commercial applications.

One of the defining features of the Powerware UPS is its robust architecture which ensures high availability and reliability. Designed for mission-critical environments, these units often come equipped with advanced technologies that facilitate seamless operation during power interruptions or fluctuations.

The Powerware UPS employs double-conversion online technology that offers superior protection by continuously converting incoming AC power to DC and then back to AC. This process isolates the connected equipment from all power disturbances, such as surges, sags, and electrical noise, thus ensuring clean and stable output power. With this technology, users can rest assured that their sensitive electronics and IT infrastructure are shielded from any potential damage caused by irregular power supply.

Additionally, the Powerware series includes intelligent battery management systems that extend battery life and optimize performance. This feature involves real-time monitoring of battery health and automatic adjustment of charging methods to enhance efficiency. Users benefit from reduced maintenance costs and increased operational uptime due to improved battery management.

Moreover, the Powerware UPS is designed with scalability in mind. These units can be configured in parallel for load sharing, allowing organizations to expand their power capacity as needed without having to invest in entirely new systems. This flexibility is particularly beneficial for growing businesses that anticipate increased power needs over time.

The compact design and enhanced cooling systems further characterize the Powerware UPS, making it suitable for installations in space-constrained environments. The units are often equipped with user-friendly interfaces, providing easy access to critical information and diagnostics for power management.

In summary, the Powerware series with 208/120V, 400/230V, 380/220V, and 415/240V configurations represents a comprehensive solution for ensuring uninterrupted power supply in various settings. Its advanced technology, battery management features, scalability, and space-saving design make it an excellent choice for organizations seeking reliable power protection.