INSTALLATION
3.Attach the mounting bracket to the wall with appropriate wall anchors (not supplied). See the mounting template in Figure 3.
Verify that at least two wall anchors attach to studs within the wall.
376.5mm (14.82")
152.4 mm |
|
|
|
|
| 152.4 mm |
|
| 16.8 mm | |||
(6.00") |
|
|
| (6.00") |
|
|
| |||||
|
|
|
| (0.66") | ||||||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
∅ 12.7 mm | ∅ 5.3 mm |
(0.50") TYP | (0.21") TYP |
226.0 mm | 283.5 mm |
(8.90") | (11.16") |
Figure 3. Mounting Template
4.Slide the loosened front screws on the electronics module into the slots on the mounting bracket.
5.Verify all screw holes are aligned. Reinstall the four screws removed in Step 2, but do not fully tighten. See Figure 2.
6.If installing the optional conduit box, continue to Step 7. Otherwise, proceed to Step 11.
7.Remove the front plate from each conduit box. Retain the plates and screws for later reinstallation. See Figure 4.
EATON Powerware® Energy Management System (EMS) Upgrade Kit User’s Guide S 164201724 Rev 1 www.powerware.com | 11 |
