INSTALLATION
5.Verify that meter and status information from the EMS−UGK displays on the page, similar to the example shown in Figure 15.
NOTE Because the system is not yet configured, active alarms may appear in the Active Alarms window upon connection and may be ignored.
If your system is dual input but only one input displays on the System Status page, click the Feature Settings tab and select the Enable Dual Input Mode check box. Return to the System Status page to verify that both inputs display (as shown in Figure 15), then continue to Step 6.
Active |
Alarms |
Window |
Figure 15. System Status Page (Connected)
EATON Powerware® Energy Management System (EMS) Upgrade Kit User’s Guide S 164201724 Rev 1 www.powerware.com | 27 |
