Making/Answering Calls
16 For assistance, please visit http://www.panasonic.com/phonehelp
Making calls1Lift the handset and dial the phone
number.
LTo correct a digit, press {CLEAR}.
2Press {C} or {CALL}.
3When you finish talking, press {OFF} or
place the handset on the charger.
Using the speakerphone
1Lift the handset, dial the phone number,
and press {s}.
LSpeak alternately with the other party.
2When you finish talking, press {OFF}.
Note:
LUse the speakerphone in a quiet
environment.
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
There are 6 levels.
Press {^} or {V} repeatedly while talking.
Note:
LIf you adjust the receiver volume to level
5 or 6 during a conversation, it will
automatically change to level 4 after you
hang up or switch to speakerphone.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1{REDIAL}
2Press {^} or {V} to select the desired
number.
3{C}
Note:
LThe caller’s name is not stored in the
redial list when calling back from the
caller list.
Erasing a number in the redial list
1{REDIAL}
2Press {^} or {V} to select the desired
number. i {ERASE}
3“Yes” i {SELECT} i {OFF}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card
access number and/or PIN in the
phonebook, a pause is also needed (page
23).
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1{9} i {PAUSE} i Dial the phone
number.
2{C}
Note:
LA 3.5 second pause is inserted each
time {PAUSE } is pressed. Press
repeatedly to insert longer pauses.
TGA572.book Page 16 Thursday, June 8, 2006 7:03 PM